Ten Things Everybody Is Uncertain About The Word "Ghost Immobiliser Problems."

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. This system is discrete and does not require additional key fobs.

The device utilizes buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin sequence that can be altered up to 20 times. This will allow your vehicle to start.

Simple PIN Code Change Process

With the increasing rate of vehicle theft, a lot of owners are seeking to improve their security. There are many different types of security products that are available for sale that range from tracking systems to alarms and immobilisers. They're not all equally effective at protecting your car. While a tracking system can assist in finding your vehicle in the event of theft, it can not prevent the crime from occurring in the first instance. An immobiliser, on contrary does exactly what it says on the label: it shuts off your car's engine to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves to steal your car.

The ghost device utilizes the buttons on your car to create a unique sequence that must be entered in order for the engine to start. This can be done using the heater, window or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the need to use the button sequence. This is a great option if you want to give your car to valet parking or for maintenance. The immobiliser will remain in operation.

The Ghost is an unique and innovative device that works by using the buttons of your vehicle instead of as a separate unit. It's not just an effective deterrent to theft of your vehicle however, it can be used on future vehicles you own. This makes it a much better investment than a traditional wheel lock.

Weatherproof, tiny device

The Autowatch Ghost Immobiliser is a high-tech security system that safeguards your pride & joy from key hacking and cloning. It also blocks ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for additional wiring and has been extensively tested to ensure it works with all vehicles. It also is resistant to jamming devices which are a typical method used by car thieves to bypass immobilisers.

The advantage of CAN data over conventional systems is that they operate silently. It isn't detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by traditional diagnostic tools. The Autowatch ghost installations reviews doesn't produce LED indications and uses the buttons on your vehicle, such as the steering wheel or centre console panels to create a unique, changeable disarm sequence. You can make this sequence up to 20 presses long to provide additional security. The iPhone app allows only one connection, with an individual pairing code for the ghost immobiliser Tracker (list-cleveland-3.blogbright.net). All communication between the two devices is encrypted.

The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to run if the correct PIN code is entered. It is possible to operate temporarily in valet or service mode (with parameters set, such as 30mph speed limit) which means you can offer your vehicle to valet or service without having to enter an entry code.

Each vehicle is tested

The autowatch ghost immobiliser fitting ghost immobiliser price is a first-of-its-kind aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device intercepts electronic signals to block your car's system from performing its normal start-up routine until you input the passcode you have created. The system can be activated and deactivated using your own smartphone application without the need for additional wires.

The factory-installed immobilisers function with a transponder which is embedded in the key. This transmits a signal to the ECU. The car will start when the correct code is transmitted. However, if a transponder of a different vehicle is used instead, the immobiliser won't recognise it. This enables the vehicle to be stolen and started. The Ghost immobiliser has been developed by a South African company at the top of security systems for vehicles technology. It guards you against key cloning or hacking, and even key theft. The only way that a burglar could take your car is physically towing it away, and even then they would not be capable of driving it.

Ghost makes use of buttons in your vehicle, such as the indicator stalk, the steering wheel, as well as the door panels, to generate unique PIN codes which must be entered in order to use your vehicle. This is not required to use additional hardware like keys-fobs, and can be up to 20 presses long. It is also inaccessible to diagnostics equipment and doesn't transmit radio frequency signals, so thieves cannot use sophisticated RF scanning or code-grabbing technology to detect that security systems have been installed.

Ghost is more difficult to get rid of than car alarms that require disarming using several buttons. This makes it an excellent supplement to a GPS tracker which helps locate your car after it has been taken.

Emergency PIN code override

You do not have to look too far on social media to find stories or even videos of vehicles that were stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking devices that allow them to start your vehicle without the original keys.

The Ghost immobiliser has been specifically designed to prevent this, and give you an extra layer of security in order to keep your vehicle from being targeted by thieves. It is created by creating an unique pin code push sequence from your buttons on the steering wheel, door panel and the centre console. The unique pin code must be entered along with your original key fob to prevent the vehicle from beginning. The unique override pin can be found on a black card which you will receive following your installation. It is easy to remember since there aren't any LED indicators.

The device is hidden within the wiring of the vehicle and doesn't emit radio signals. Therefore, it cannot be detected using diagnostic software that can determine the type of security system you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Unlike other security systems, which rely on a relay in the engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This enables them to shut down the vehicle completely with a digital block of commands that is sent to both the ECU and the engine.

These systems can also be linked to an analog alarm immobiliser or tracker. This should be specified prior to the installation. They are also service/valet-mode compatible and a good alternative to a tracker having your car in for repair at the dealers.

Service/Valet Mode

In recent years there has been an increase in the number of vehicles stolen without the owner's keys. With the ease of access to key cloning equipment and door lock pick sets it is now much easier for thieves to take your prized possessions. To prevent this from happening, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys were cloned or your car has been hijacked.

It directly communicates with your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It is completely silent, since it doesn't use radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also protects you from introducing the new ECU or key to bypass the system, because only the PIN number allows the engine to start.

The device is hidden within your car by using buttons on the steering wheel, centre console & door panels. A unique and reversible PIN code sequence up to 20 digits needs to be entered before you are able to start your car.

This is the first aftermarket CAN-bus immobiliser for the market that was designed. It will prevent your vehicle from being driven or even started when you don't enter a PIN code first. If you are driving away with the device in motion the indicator will flash on your dashboard and flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your vehicle will continue to operate just as normal. If you do not enter your PIN code at this time the indication will continue to flash and require another PIN code for every attempt to start your car.