The Most Hilarious Complaints We've Heard About Double Glazing Lock Repairs

double glazed repairs Glazing Lock Repairs

Quality locks on your doors and windows can stop burglars from gaining entry into your home. Generally, they don't like breaking glass or squeezing through windows that are not closed.

Some double glazed repair glazing owners, however, have experienced problems with their door or window lock after installing. Fortunately, these issues are often fixable without having to buy new double glazing.

Broken or faulty locks

If your uPVC door or window lock is damaged or defective or has a problem, a locksmith will fix it. They can repair hinges, striker plates and locks for double glazing. They will also be able to reposition the cylinder to fix any misalignment issues that could be causing the handle to not function properly.

The mechanism could be seized when the key is inserted into the lock, but it will not turn or become difficult for you to insert. The dirt or grease could be trapped in the mechanism. If this is the case, then it may be possible to clean the lock and lubricate it. Make use of a dry lubricant, such as graphite or teflon, not oil, because oil can attract dirt and cause it to stick to the mechanism's inside. After lubricating the lock you need to insert the key and then try to turn it. The lubricant should make its way through the mechanism and the lock should be able to rotate with ease.

A damaged lock can be caused by loose screws inside the mechanism of the lock. They can become loose, fall out, or even break off completely preventing the lock to perform as it should. The screws can be tightened using a screwdriver, but you must be cautious not to tighten them too much. This can damage the internal components.

A damaged lock could be dangerous for both you and your family members especially if you have young children. They can open the door without knowing and gain access to your house. If you're concerned that this could happen, a vetted professional locksmith can help you secure the double glazing windows repairs-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that can repair double glazed window all kinds of defective and broken mechanisms on both uPVC doors and windows. We can also reconfigure your uPVC or double glazing window repair glazing locking system to meet your particular requirements, meaning that in a lot of cases replacement windows and doors are not necessary.

Handles that are damaged or damaged

A lot of double-glazed windows come with a multi-point lock as a part of the overall security package. This is a great option for those worried about potential thieves who may try to gain access to your home. Ask your locksmith about antilift blocks. These can be installed as an addition to the existing locks and can ensure that your windows are securely closed.

It's not uncommon for the handles to be damaged or fail. They are the first component of your window that could be forced open by a criminal intent on breaking into. The good news is, this is among the easiest parts to repair.

Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette which is designed to withstand forced entry. This security upgrade is available as an option with new uPVC windows. As an upgrade option, older style uPVC or aluminium handles that are no longer in use can be upgraded to shoot bolt locking systems.

If a handle is damaged, it is essential to get the handle repaired as quickly as you can. Handles that are damaged can prevent the window from closing correctly and also allowing drafts to enter. It can also be a flaw that thieves who are opportunistic could take advantage of and put the belongings of your family and your own at risk.

To repair the broken mechanism, first access the window frame, then take off the damaged handle. The gearbox is then opened to identify the type of gearbox used to open the handle. This allows a replacement that matches the profile and internal window frame mechanisms.

After the mechanism is replaced, the handle may be put back together using the original screws. However, we recommend replacing them with longer screws as they will provide the most secure fit. The final step is to apply a coat of clear sealant to protect the handle from further rust. Once you've completed this step, your window should be functional again, and at a fraction the cost of replacing it.

Broken or Faulty Hinges

If your windows do not close properly, you could be experiencing draughts, a weakening of your home's security and an increased risk of water or damp damage. Window hinges that break or fail are a common issue and can be easily repaired.

If your windows made of uPVC won't open or shut it's likely that hinges need to be replaced or repaired. Many window companies will require you to buy a new window unit to resolve this problem, but we can replace the hinges to save you money.

Window hinges are often damaged due to repeated use or may be weakened through rust over time. In the event of a damaged hinge, it is important to take measures to prevent further damage by being careful not to force the window to close or open.

Identifying your hinge type will help you locate the correct parts to fix it. Maco, Mila and Roto are all window hinges. Consult a professional to avoid purchasing parts that won't fit into your existing hardware. This can result in further damage.

Faulty hinges are a major issue for uPVC windows and doors. They can be a major source of noise, and they can also allow water to infiltrate which could damage your windows.

To resolve this issue, first verify whether the pin barrel on both hinge halves is aligned. If it isn't then tap the head pin with a hammer to make a small bend in the hinge barrel. This will keep the pin in position. A friend can help you hold the doors as you take off hinge screws and hinges. Replace the hinges using those that are of the same size, and install the screws with glue. Finally, secure the hinges with weights or clamps while the glue sets.

After you have repaired your hinges, you are able to install the door again. You could also reattach the handle. It is recommended to replace the screws using the same length of wood dowels as the original screw so that they align with each one.

Glass that is damaged or Faulty

uPVC Windows can be damaged over time, even though they are great at keeping out the cold and keeping warmth. This can include broken or damaged glass, as well as faulty locks. This issue can be costly should it be neglected. It can also affect the aesthetics of your home and can lead to loss of insulation, which is why it is essential to fix any damage as soon as you can.

You can repair your cracked glass by yourself if you have the proper tools and techniques. First, ensure that the surrounding area around the glass is free of debris to ensure that any shards do not harm anyone and aren't an accident-prone area. Then, take any pieces of broken glass and dispose of them appropriately. Apply masking tape over the entire area. This will prevent shards of glass from sticking to your skin and splintering when you move them. If you're dealing with a Double glaze Window repair-paned window, it's best to prepare the glass before gluing it back into place so that you are sure you'll have enough space complete the project.

Before applying the glue, wipe the surface of the broken frame and the glass with a dry, clean cloth. Follow the directions for application and curing times that can differ from product to. You may need to clamp the cracked glass with lightweight clamps designed to hold fragile materials, depending on the angle.

Once the adhesive has fully set, carefully place the glass in the window frame. Make sure it is aligned with the frame's edge and that there aren't gaps between the glass sash and the frame. Avoid bending the glass as you reinstall it, as this could weaken the seal. This could lead to water infiltration or condensation.

Contact a professional glazier, such as O'Brien(r), to arrange an exchange if your glass window has been completely broken. Leaving broken glass unattended can cause danger to pets and children and is why it's important to act swiftly.